Menu

0

€0.00

Dual Roof Heating Torch

Description

Product Description Roofing burner with two nozzles, designed for professionals covering large areas of the roof with heat-sealing roofing paper.... read more

Price

55.54 46.13

Quantity

- +

Total

55.54 46.13

- +

Description

Product Description
Roofing burner with two nozzles, designed for professionals covering large areas of the roof with heat-sealing roofing paper. The length of the burner allows you to work in a standing position, has a high thermal efficiency / 2 burners /, significantly speeds up the work. The handle has a special valve that shuts off the gas supply when the burner is removed. Such a solution causes great savings in gas consumption.

TECHNICAL SPECIFICATIONS:
• Number of burner cups – 2
• The size of the cups [mm] – 60
• Nominal pressure of gas [MPa] – 1,2
• Flame temperature [ºC] – 1500-1800
• Nominal stream [g / h] – 7800
• Thermal load [kW] – 110
• Hose length [m] – 5
• Burner length (without hose length) [mm] – 1385
Purpose / Use
Gas burners are designed for soldering, heating, drying and roofing. Thanks to the power source using a can of compressed butane (you can also give a mixture of propane and butane), you can work in places without energy sources.
Using
The device must be installed in accordance with the operating instructions. Tighten the hose to the assembled device. Connect the other end of the hose to the gas bottle.
Check the connections for leaks by slightly unscrewing the cylinder valve, then apply soapy water to the connections. If gas bubbles form, turn off the gas supply and tighten the leaks. Repeat the procedure until complete gas impermeability is complete.

Unscrew the gas valve in the cylinder, and then unscrew the valve in the device, but only so as to allow the release of gas. Light the gas at the outlet of the cup. To do this, use a special lighter designed to ignite portable gas burners. After approx. 20 seconds, press the burner lever). If the flame is too short, set the gas pressure using the burner valve. After releasing the lever, the flame will return to economy mode.
After finishing work, close the cylinder valve and then, after extinguishing the flame, set the burner on a non-combustible base for cooling. After cooling, continue maintenance.

Details of the assembly, operation and maintenance of the device are given in the attached instruction manual.
Package contents
• Burner (G3 / 8 “-19) with two nozzles with a diameter of 60 mm
• 5 m of a hose (G3 / 8 “-19, 21.8-14)
Technical details
Index number 73343
EAN 5906083733437
Brand Vorel
PCS block
Gross weight (kg) 2.8130
Master Carton MC 8
Pal 48

FLAME TEMP. 1500 ° C ~ 1800 ° C; HEAT POWER 110KW; GAS CONSUMPTION 7800 g / h; GAS TORCH WITH FLAME ADJUSTMENT; HOSE LENGTH 5M